Create CloudLink
Overview
Use F5 Distributed Cloud Console to create a CloudLink connection for use with a Distributed Cloud Customer Edge (CE) Site.
About Distributed Cloud CloudLink
A CloudLink allows Distributed Cloud to orchestrate an existing direct connection. You can establish a multi-cloud networking fabric, and then connect, deliver, secure, and operate networks and apps across hybrid environments. CloudLink is currently available for Amazon Web Services (AWS) and Google Cloud Platform (GCP) as providers.
Important: Distributed Cloud CloudLink is a limited availability (LA) feature.
Before you begin
Before you begin, make sure you have:
-
A Distributed Cloud account. If you don't have an account, see Get Started with Distributed Cloud Console.
-
For AWS, order a connection into AWS using Equinix (or another provider) and have a Direct Connect connection available.
-
For GCP:
-
Use an existing GCP Cloud Interconnect or order one through Equinix (or other providers).
-
Use an existing VPC or create a new VPC. This VPC must be the same VPC used to provision the CE Site. Brownfield deployment support only.
-
Confirm that the cloud router and the Cloud Interconnect are provisioned using the existing VPC.
-
Configuration sequence
The following table provides the sequence for setting up the connection:
| Activity | Description |
|---|---|
| Create CloudLink | Provide cloud credentials and specify connection details |
| Configure CE sites | Deploy CE sites, establish private connectivity, and attach workload |
| Apply networking and security services | Select and configure networking and security services |
Create CloudLink for AWS
An AWS CloudLink allows you to use a private connection for your CE Site registration and communications with the F5 RE.
Step 1: Go to the CloudLink page.
-
In Distributed Cloud Console, select Multi-Cloud Network Connect.
-
Select Manage > Networking > CloudLinks.
Step 2: Create an AWS CloudLink.
-
Select Add CloudLink.
-
In the Name field, enter the name for the CloudLink.
-
From the Type drop-down menu, select Amazon Web Services (AWS).
-
From the Account Credential drop-down menu, select your cloud credentials. Optionally, select Add to create new credentials.
Tip: For complete instructions, see the Create Cloud Credentials guide.
-
Select Add in the Bring Your Own Connections section to configure a connection:
-
Enter a name for this connection.
-
From the Region menu, select the region where the AWS site is located.
-
In the Direct Connect Connection Id field, enter the connection ID. Select See Suggestions in the drop-down menu to see suggested values for Direct Connect connection IDs.
-
Enter the VLAN in the Virtual Local Area Network (VLAN) field. Get these values from AWS Management Console on the Direct Connect page.

Figure: AWS Management Console
-
In the BGP ASN field, enter your BGP ASN.
-
Select Configure to enter your BGP Authorization key.
-
In the Peer IP Addresses section, enter the router IP addresses for both the customer side (BGP peer) and the AWS side (BGP peer).
-
Select Apply to save the connection.
-
Note: You can add multiple Direct Connect connections to a single CloudLink using Add. Up to ten connections are supported per CloudLink.
-
From the Direct Connect Gateway ASN drop-down menu, select Custom ASN.
-
In the Custom ASN field, enter an ASN. Distributed Cloud uses the custom ASN to create an AWS Direct Connect gateway.
-
Optionally, set up private connectivity to the F5 RE: From the Private Connectivity via Regional Edge (RE) drop-down menu, select Enable. From the Private ADN Network drop-down menu, select a network name.
-
Select Add CloudLink.
Step 3: Verify CloudLink status.
-
On the CloudLink page, verify that the State column shows Up and the Deployment Status column shows Ready.

Figure: CloudLink created
-
Select ... > Show Status for the CloudLink you created.

Figure: CloudLink object status
-
Select the UID link and verify that the Direct Connect connection name is shown in the CloudLink Status section.
-
If the connection fails, select the Conditions Type entry or the Connection ID entry for more details.
-
In AWS Management Console, verify that the virtual interface (VIF) was created with the name specified and that its status is pending.

Figure: VIF created
Step 4: Create CE Site.
-
Go to Manage > Site Management > AWS TGW Sites.
-
Select Add AWS TGW Site.
-
Enter a site name in the Metadata section.
-
Select Configure in the AWS Resources section to enter AWS credentials and resources.
-
Select your AWS credentials from the Credential Reference drop-down menu. Alternatively, use the drop-down menu to select Add and create new credentials.
-
Select your CE Site's region using the AWS Region drop-down menu in the Region & Services VPC section.
-
Select New VPC for the New/Existing Services VPC drop-down menu. Select Autogenerate VPC Name and enter the IP address in the new VPC fields.
-
Go to the Site Node Parameters section and select Add to create an ingress or egress gateway.
- Enter the Availability Zone (AZ) name in the AWS AZ Name field.
- Select New Subnet in the Workload Subnet drop-down menu and then enter the IPv4 value for the subnet.
- Select New Subnet in the Subnet for Outside Interface drop-down menu and then enter the IPv4 value for the subnet.
- Select Autogenerate Subnet for the Subnet for Inside Interface drop-down menu.
- Select Apply to save the AZ parameters.
-
In the Public SSH key field, enter the key that allows access to the CE Site nodes.
-
Go to the bottom and select Apply to save your AWS credentials and resources.
-
-
Go to the Private Connectivity section. From the Private Connectivity To Site menu, select Enable Private Connectivity via CloudLink.
-
Select Configure.
-
Select the CloudLink you created using the Associate CloudLink drop-down menu.
-
Select Apply to save the private connection.
-
-
If you have a site previously created, you can associate it with a CloudLink by editing the site and enabling private connectivity.
-
For a new site, select Add AWS TGW Site. For an existing site, select Save AWS TGW Site.
Tip: For complete instructions, see the Create AWS Site with TGW (Orchestrated) guide.
Step 5: Apply the Terraform.
In the Multi-Cloud Network Connect workspace, on the AWS TGW Sites page, select Apply with the CE Site you created. This action starts the process of creating the CE Site in AWS. It may take time (about 15 to 50 minutes). After the process completes, the status changes to Applied.
Create CloudLink for GCP
A GCP CloudLink allows you to use a private connection for your CE Site registration and communications with the F5 RE.
Creating a GCP CloudLink requires an existing and configured router and Cloud Interconnect in GCP. Distributed Cloud Console doesn't perform orchestration. You provide the Cloud Interconnect attachment name. Distributed Cloud Console retrieves all the required information to create the CloudLink.
Step 1: Go to the CloudLink page.
-
In Distributed Cloud Console, select Multi-Cloud Network Connect.
-
Select Manage > Networking > CloudLinks.
Step 2: Create a GCP CloudLink.
-
Select Add CloudLink.
-
In the Name field, enter the name for the CloudLink.
-
From the Type drop-down menu, select Google Cloud Platform.
-
From the Account Credential drop-down menu, select your cloud credentials. Optionally, select Add to create new credentials.
Tip: For complete instructions, see the Create Cloud Credentials guide.
-
Select Add in the Bring Your Own Connections section to configure a connection:
-
Enter a name for this connection.
-
From the Region menu, select the region where the GCP site is located.
-
From the Project drop-down menu, select Same as Credential (if the project for the Cloud Interconnect and the credential are the same). Or select Specified Project and enter the project for the Cloud Interconnect.
-
From the Interconnect Attachment Name drop-down menu, enter the Cloud Interconnect attachment name.
-
Select Apply to save the connection.
-
Note: You can add multiple Cloud Interconnect connections to a single CloudLink using Add. Up to ten connections are supported per CloudLink.
-
Optionally, set up private connectivity to the F5 RE: From the Private Connectivity via Regional Edge (RE) drop-down menu, select Enable. From the Private ADN Network drop-down menu, select a network name.
-
Select Add CloudLink.
Step 3: Verify CloudLink status.
-
On the CloudLink page, verify that the State column shows Up and the Deployment Status column shows Customer Deployed.
-
Select ... > Show Status for the CloudLink you created.
-
Select the UID link and verify that the Cloud Interconnect connection name is shown in the CloudLink Status section.
-
If the connection fails, select the Conditions Type entry or the Connection ID entry for more details.
-
Select a router in the Cloud Router Name column to see the router status. Distributed Cloud Console retrieves the router status from GCP.
-
Go to the BGP Peers section to verify that the BGP peer state shows Established and the BGP status shows Up.
Step 4: Associate the CloudLink with a CE Site.
-
Go to Manage > Site Management > GPC VPC Sites.
-
Select ... for your site and select Manage Configuration to open the site configuration form.
-
Select Edit Configuration in the top right corner.
-
Go to the Advanced Configuration section.
-
From the Private Connectivity To Site drop-down menu, select Enable Private Connectivity. Select Configure and then do the following:
-
From the Associate CloudLink drop-down menu, select the CloudLink you previously created.
-
From the Choose Site Network drop-down menu, select Outside Network or Inside Network.
-
Select Apply to save the private connection.
-
-
Select Save GCP VPC Site.
Delete a CloudLink
You can only delete the CloudLink object after removing the CE Site association with the CloudLink object and re-applying or deleting the CE Site. If you remove the CloudLink association and try to delete the CloudLink, the deletion process remains stuck.
-
In Distributed Cloud Console, select Multi-Cloud Network Connect.
-
Select Manage > Networking > CloudLinks.
-
Select ... > Delete in the Action column.
-
Select Delete in the confirmation window.
Monitor CloudLink connections
You can monitor your CloudLink connections as part of CE Site network monitoring. See Monitor Site Networking for more information.
References
For more information, see:
API references
For more information, see:


